Skip to content
Serving Fremont and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (213) 723-6751

Heating Repair in East Palo Alto, CA

Serving East Palo Alto and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (213) 723-6751

The short answer

SureBreeze repairs gas furnaces and heat pumps in East Palo Alto homes, from failed igniters and dirty flame sensors to heat pump defrost and airflow problems. Bay Area Air District rules don't require you to replace a working furnace, so repair is often a sensible choice. Gas furnaces manufactured from 2029 must meet a zero-NOx standard, which is worth considering if your system is aging.

When the furnace in your East Palo Alto home stops working, the house gets cold quickly, even in a mild Bay Area winter. SureBreeze AC Repair Service travels from our base in Fremont to diagnose and repair gas furnaces, heat pumps, and the ductwork and controls connected to them. This page covers the heating problems we see most often, what happens during a repair visit, and how current Bay Area Air District rules affect the choice between repairing and replacing your system.

Heating Problems We Fix in East Palo Alto Homes

Most heating calls start with one of a few symptoms. If you tell us which one you're seeing and when it started, we can plan for the likely parts before we arrive.

  • Furnace runs but blows cool or lukewarm air
  • Burner lights, then shuts off after a few seconds
  • No response when the thermostat calls for heat
  • Heat pump icing up, stuck in defrost, or running constantly without warming the house
  • Banging, squealing, or rattling from the furnace or blower
  • A burning or musty smell that lasts past the first few minutes of the season
  • Some rooms stay warm while others stay cold
  • Pilot or igniter problems on older gas furnaces

What a Heating Repair Visit Looks Like

A technician starts by asking what you've noticed, then checks the thermostat settings and wiring before opening the unit. On a gas furnace, we inspect the igniter, flame sensor, gas valve, pressure switch, inducer motor, limit switches, and any error codes on the control board. On a heat pump, we check refrigerant pressures, the reversing valve, defrost controls, the outdoor coil, and the backup heat strips.

We also look at the things that cause repeat calls: a clogged filter, a blocked condensate line, a loose flue connection, or a return duct crushed in the attic or crawl space. Before any work starts, we explain what failed, what the fix involves, and whether anything else looks close to failing, so you can decide how to proceed.

If we smell gas or find signs of a cracked heat exchanger or poor venting, we'll shut the furnace down and explain why. Carbon monoxide safety comes before getting the heat back on.

How the Local Climate Affects Your Heater

East Palo Alto sits close to the Bay. Like the neighboring Santa Clara Valley, it has dry summers and mild, damp winters. Areas near the water stay cooler in summer than inland parts of the valley, but the winter pattern is similar: many cool, wet nights and few hard freezes.

That pattern shapes the problems we find. A furnace that sits idle from spring until late fall collects dust on the flame sensor and burners, which is why so many systems fail on the first cold night of the season. Damp winter air can corrode electrical connections and encourage mold in poorly sealed ducts. Heat pumps here run mostly in mild temperatures, so when one struggles, the cause is usually a sensor, a refrigerant leak, or an airflow problem rather than the weather.

A quick check in early fall, before you need heat, catches many of these issues early.

Repair or Replace? What Current Rules Mean for You

Bay Area Air District appliance rules do not require you to replace a furnace that still works. They apply only when an existing furnace fails or is replaced. If your system can be repaired safely, you can keep using it.

Looking ahead, Rule 9-4 requires natural gas furnaces manufactured from 2029 onward to meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when a furnace is replaced after that date. If your furnace is aging and repairs are becoming frequent, it's worth weighing that timeline before deciding on a major repair.

On incentives: the federal 25C tax credit for heat pumps covered only systems placed in service before December 31, 2025, so it isn't available for new installations. BayREN and your local clean energy provider may offer heat pump and electrification incentives, but amounts and availability change by funding cycle. We confirm the current offer before we include it in any quote.

Serving East Palo Alto and Nearby Cities

East Palo Alto is in San Mateo County, about 12 miles southwest of our Fremont base. We also handle heating repair in Menlo Park, Mountain View, Newark, Sunnyvale, and Hayward.

When you contact us, share the make and model of your furnace or heat pump from the unit's label if you can find it, along with any error code or blinking light pattern. That information helps us plan the visit and bring the right parts.

More services in East Palo Alto

Related

What to expect

How a visit goes

  1. Diagnosis comes first

    We test and inspect the system to find the actual cause before suggesting parts or replacement, so you aren't paying to guess.

  2. Options you can compare

    When a system could be repaired or replaced, we lay out both paths, what each involves and the tradeoffs, so you can decide with the full picture.

  3. Straight answers on rules and incentives

    We explain how local air district rules and current rebate programs apply to your home, and we confirm current incentive details before quoting them.

FAQ

Common questions

Do I have to replace my gas furnace because of the new Bay Area Air District rules?

No. The Air District rules do not require replacing working equipment. They apply only when an existing furnace fails or is replaced. If your furnace can be repaired safely, you can keep using it.

Why does my furnace shut off a few seconds after the burners light?

The most common cause is a dirty flame sensor, which can't confirm the flame and shuts the gas off as a safety measure. A failing pressure switch, blocked vent, or clogged filter can cause the same symptom, so we test each one before replacing parts.

Is it safe to run a furnace that smells like burning?

A brief dusty smell the first time you turn on the heat each season is normal. If the smell lasts, seems electrical, or you smell gas, turn the system off. If you smell gas, leave the house and contact your gas utility before scheduling a repair.

Can I still get a federal tax credit for a new heat pump?

No. The federal 25C credit applied to qualifying heat pumps placed in service before December 31, 2025, and it isn't available for new installations. BayREN and your local clean energy provider may have current incentives, and we confirm what's offered before quoting it.

How do I know whether to repair or replace an older furnace?

Consider the age of the unit, how often it has needed repairs, and whether the problem affects safety, such as a cracked heat exchanger. Also keep in mind that gas furnaces manufactured from 2029 must meet a zero-NOx standard, which points toward heat pumps for future replacements.

Do you repair heat pumps as well as gas furnaces?

Yes. We diagnose and repair heat pumps in East Palo Alto homes, including refrigerant leaks, defrost control problems, reversing valve failures, iced outdoor coils, and backup heat strip issues.

Need heating or cooling help in Fremont?

Tell us what your system is doing and we'll schedule a visit to diagnose it. You'll get a clear explanation of the problem and your options before any work begins.

Call (213) 723-6751 Request Service